Joint Filling Mostar

Good wear resistance, easy to prepare, avoid cracks for all interior areas of floor and wall grounting of ceramic tiles, mosaics and marble for 1-6 mm joints.

Properties of Application Surface:
The joints must be clean and free of dust. It is advised to dampened with a wet sponge. Wait until adhesive has completely achieved sufficient hardness.

User Instructions:
Pour mostar into 6-7 liters of clean water slowly and mix homogeneous mixture free from lumps. It should be precisely measured that amount of water. After resting it for 5 minutes, remix it for 1-2 minutes again. Mortar is ready to use. Fill the joints completely with mortar using suitable rubber trowel and remove excess mortar from surface with diagonal moves. Wait for the settling of the material and repeat this procedure. Then, clean surface with a damp sponge give the final shape to the material. Any residue left can be cleaned from the surface with a clean dry cloth.