Ceramic Tile Adhesive Mortar

With cement based ceramic tile adhesive with reduced slip properties it is applied on the cement based plaster, screed and concrete on the horizontal and vertical surfaces.

Properties of Application Surface:
All substrates must be strong, dry, clean and free from oil, grease, dust. Surface irregularities, cracks and holes should be repaired and the substrates must be primed before bonding of tiles on existing ceramic tiles.

User Instructions:
Pour it into 6-7 clean water slowly and mix with a low speed mixer to get a homogeneous mixture free from lumps. Allow the mortar to rest for 5 minutes and remix it again. Spread mortar onto the substrate then notch with the toothed side of trowel. Large tiles should be applied also on back of tiles within application.