Machine Spray Plaster

 With increased heat and sound insulation properties It is applicable for concrete, gross concrete, gas-concrete, bims and

Properties of Application Surface:

 All substrates must be strong, dry, clean and free from oil, grease, dust. Smooth surface must be formed on application surface. The surfaces (brick,concrete,and gas concrete) must be wet before application.

User Instructions:

 Appropriate water-plaster ratio is regulated with plaster machine. In all application plaster thickness must be 1.5 cm. Regarding to this thickness anos are settled with interval which must not be greater then used gauge height. The mixture which made by plaster machine is sprayed between anos. The filled surface is made smooth and extra mixture is taken from the surface. After this process the mixture which is on surface is left and passed the other empty anos. Before starting to make plaster mixture pre-setting, the surface is polished with trowel. Approximately after one hour water is sprinkled on the polished surface. The surface is shined with trfil and polished with trowel again.